Ariane 5 ECA

5737320
Photo: ESA/Arianespace

The Ariane 5 is an expendable Launch Vehicle that is being operated by Arianespace. Astrium, an EADS company, is the prime contractor for the Vehicle and is responsible for assembly of the rockets. Astrium is the leader of various sub-contractors that contribute components of the vehicle. Ariane 5 is used to deliver Payloads to Geostationary Transfer Orbit and Low Earth Orbit. The Rocket launches from the Kourou Spaceport, French Guiana. Ariane 5 rockets are manufactured under the authority of the European Space Agency and Centre National d’Études Spatiales (CNES).

Ariane 5 has logged over 75 flights since the maiden flight in 1996. With that record it has become Europe’s workhorse and will be operated at least until 2015. The Rocket is a flight proven launcher with a record of 69 successes and 2 failures. two flights were filed as partial failures. The Ariane 5 is the fifth rocket of the Ariane family, but has not been directly derived from previous variants. Over the course of the rockets operating lifetime, modifications were made so that different variants of the rocket are available.

The ECA-Type is the most powerful variant of the rocket and is used for most launches with the ES specified vehicle only launching the ATV (Automated Transfer Vehicle) into Low Earth Orbit. Notable payloads that were delivered to space by an Ariane 5 include the Rosetta and Planck Probes as well as the Herschel Space Observatory. Currently, Ariane 5 is mostly used to commercial satellite delivery launching TV or telecommunication satellites for various customers.


Ariane 5 ECA Specifications

A5 Spec.

Core Stage

Photo: Arianespace/ESA/CNES
Photo: Arianespace/ESA/CNES
Type Cryo Core EPC-E
Inert Mass 14,700kg
Diameter 5.4m
Length 30.5m
Propellant Liquid Hydrogen
Oxidizer Liquid Oxygen
Fuel&Oxidizer Mass 170t
LOX Mass/Volume 133t/120m³
LH2 Mass/Volume 26t/390m³
Guidance From VEB
Propulsion 1 Vulcain
Thrust at Sea Level 960kN
Thrust (Vacuum) 1,340kN (250,000lbf)
Engine Length 3.00m
Engine Diameter 1.76m
Engine Dry Weight 1,686kg
Burn Time 650 sec
Chamber Pressure 117.3Bar

The Cryogenic H173 Main Stage of the Ariane 5 Rocket is called the EPC (Étage Principal Cryotechnique) and is fueled by Liquid Hydrogen and Liquid Oxygen. When filled with propellants, the EPC weighs about 170 tonnes.

The different tanks for LOX and LH2 are aluminum compartments that are very thin and have to be pressurized at all times to prevent them from buckling under their own weight. The LOX tank is 4.7mm and the LH2 compartment 1.3mm thick.

At the bottom of the EPC is the propulsion segment with its Vulcain Main Engine. Its development began in 1988 and it flew for the first time in 1996 on the first Ariane 5 mission which failed.

Vulcain Engine during a Test - Photo: SNECMA/SEP/DLR/DASA
Photo: SNECMA/SEP/DLR/DASA

Currently, the Vulcain 2 engine is in use for the Ariane Program as it is 20% more powerful than the original Vulcain.

Vulcain is a gas-generator cycle rocket engine that provides 8% of Ariane’s thrust at liftoff – the rest being provided by the two Solid Rocket Boosters. The engine features regenerative cooling via a tube wall design and lower nozzle cooling capabilities. Turbopumps are used to feed the engine with propellants.

The LOX Pump spins at 13,600rpm with a power of 3MW, the LH2 Turbopump rotates at 34,000rpm with 12MW of power. Engine ignition is accomplished with three pyrotechnic devices on the Ground Support Equipment side of the Launch Pad.

The engine nozzle can be swivelled to control the launcher’s trajectory. Pitch and Yaw actuators move the engine to the correct position which is determined by the Flight Control System.

Solid Rocket Boosters

Photo: Arianespace/ESA/CNES
Photo: Arianespace/ESA/CNES
# Boosters 2
Type EAP
Manufacturer EADS/LV, Europropulsion, SABCA
Length 31.6m
Diameter 3.05m
Mass 268,000kg
Propellant Mass 237,000kg
Fuel Solid
Thrust 6,470kn (1,450,000lbf)
Burn Time 129 sec
Attitude Control Steerable nozzle (7.3°)
Nozzle Length 3.8m
Nozzle Diameter 3.1m

Two Solid Rocket Boosters are mounted on the Ariane 5 rocket. Those provide 92% of thrust at Blastoff. They are referred to as EAPs from the French Title Etage d’Acceleration à Poudre.

237 tonnes of propellant are included in each Booster. Steel casings enclose the individual segments that are joined together. Those casings are 8mm in thickness and can withstand a pressure of 64bar. Unlike Space Shuttle SRBs, the EAPs are not designed to fly again.

After being jettisoned 143 seconds into the mission, they fall back to Earth and are allowed to sink to the bottom of the ocean about 450km from the launch site. Occasionally, Boosters are equipped with parachutes for recovery and post-flight analyses.

Booster separation occurs at an altitude of 67km and is initiated by pyrotechnic devices and separation motors. After separation, the Boosters continue their uphill track for 100km before falling back to Earth. The solid fuel that powers the EAPs includes Ammonium Perchlorate, Aluminum Powder and Polybutadiene. Thrust from the Boosters is transferred to the Rocket’s Body via to the so called JAVE element on the Main Stage to which the EAPs are attached.

Cryogenic Upper Stage

Photo: ESA/CNES
Photo: ESA/CNES
Type ESC-A
Diameter 5.4m
Length 4.7m
Inert Mass 4,540kg
Propellant Liquid Hydrogen
Oxidizer Liquid Oxygen
Fuel&Oxidizer Mass 14.9t
Guidance From VEB
Propulsion 1 HM-7B
Thrust 62.7kN (14,100lbf)
Engine Length 2.01m
Engine Diameter 0.99m
Engine Dry Weight 165kg
Burn Time Variable
Thrust Levels Only 100%
Attitude control Roll, Pitch, Yaw Control
Source: Astrium
Source: Astrium

The Cryogenic Upper Stage of the Vehicle, called ESC – Étage Supérieur Cryotechnique, is fueled by Liquid Oxygen and Liquid Hydrogen.

Ariane 5-ECA utilized this version of the Upper Stage which can only be ignited once. Other versions of the second stage use different propellants and another engine. ESC is powered by a HM7-B Engine.

This engine was derived from HM4 that first flew in 1979 on the third stage of an Ariane 1 Rocket. HM7-B was used on third stages of Ariane 2, 3 and 4 Launch Vehicles. The Engine had its Ariane 5 debut on the maiden flight of the ECA variant of the launcher in 2002.

HM7-B is a gas generator engine that provides 14,100lbf of thrust. It does not have any throttle range and is only operated at 100% of rated performance. The engine provides a gimbal capability of 3°.

Vehicle Equipment Bay

Diameter 5.4m
Length 1.56m
Weight 1,300kg
Attitude Control Independent
Propellant Hydrazine
Propellant Mass 70kg
Design Full Redundancy

The VEB (Vehicle Equipment Bay) can also be called the ‘Brain’ of the launch vehicle. It houses the flight computers, electronics and avionics. Also included in the VEB are the inertial measurement units and an independent guidance system that is used to maneuver the stack after Booster Separation and especially during orbital coast phases after 2nd stage shutdown before the spacecraft are separated.

VEB located on top of the Main Cryogenic Stage and interfaces with the upper stage of the vehicle. The VEB is cylindrical in shape and can operate autonomously from launch to orbital insertion controlling all aspects of the vehicle including trajectory profiles and orientation. The inertial measurement units provide the information that the computers need to calculate the current position and required flight path to meet mission criteria. One of the key features of the VEB is the attitude control system that is comprised of Hydrazine Thrusters that are used to orient the vehicle once the ascent phase of the mission is over.

All systems of the VEB are fully redundant allowing components to fail without having an impact on mission success. Telemetry relay and communication with the ground are also features of the VEB that are important to allow ground teams to follow the mission and take necessary actions should those be required.

Photo: Arianespace/ESA/CNES
Photo: Arianespace/ESA/CNES

Speltra/Sylda

Diameter 4.56m
Length 4.90m (Variable)
Mass 425 to 535kg

Speltra-SyldaSpeltra and Sylda are structures that allow dual satellite launches. Both elements are attached at the top of the upper stage and are enclosed in the Payload Fairing.

Speltra houses one satellite while the other payload is mounted on top of the structure. Two versions of the Speltra are available at a mass of 820kg and 704kg respectively. The short type is 4.1m high while the longer version is 5.6m in length. Both variants are conical at the top to allow another payload adapter to be installed on top of the Speltra which can support an upper satellite of up to 4,500kg. Speltra has a diameter of 5.4m.

The Sylda is a similar device, but smaller in size. It has a diameter of 4.5m and is 3.2m high with a one-meter cone on top of it that allows the installation of a payload adapter. Sylda 5 has a mass of 440kg. There are six types of Sylda that vary in size, diameter and weight so that a perfect fit can be achieved for each mission. During the flight, the upper satellite is separated from the Speltra/Sylda before the structure is jettisoned in preparation for the deployment of the second satellite. Separation is initiated by pyrotechnics that cut the connection to the vehicle. Springs then push the structure away, so the second satellite is revealed for its deployment.

Sylda 5 prior to Installation - Source: Arianespace
Sylda 5 prior to Installation – Source: Arianespace

Payload Fairing

Diameter 5.4m
Length 17.0m
Mass 2,500kg (5,512lb)
Separation Pyrotechnic Activation (Actuators)
Construction Sandwich Construction
Graphite Epoxy Face Sheets
Aluminum Core

The Payload Fairing is positioned on top of the stacked vehicle and its integrated payloads. It protects satellites or other spacecraft against aerodynamic, thermal and acoustic environments that the vehicle experiences during atmospheric flight.

When the launcher has left the atmosphere, the fairing is jettisoned by pyrotechnically initiated systems. One system splits the fairing vertically, the other frees the two halves. The fairing then falls back to Earth and burns up in the atmosphere. Separating the fairing as early as possible increases ascent performance.

Ariane 5 can be equipped with two different fairing designs. Both are cylindrical in shape, but their overall length and weight varies. Both types of fairing have an inner diameter of 4.57m. The shorter version is 12.7m in length while the large fairing is 17m long. For dual satellite launches, the larger Payload Fairing is being installed on the Vehicle.

Photos: Arianespace/ESA/CNES
Photos: Arianespace/ESA/CNES

Payload Adapters

Payload Adapters interface with the vehicle and the payload and are the only attachment point of the payload on the Launcher. They house equipment that is needed for Spacecraft Separation and ensure that the satellite or spacecraft is secured during powered flight. A variety of payload adapters is available to satellite customers in order to fit a large number of spacecraft dimensions and interfaces. 9 different adapter models are currently available. Most of those have a clamp band payload separation mechanism.

A5 Adapters